Mach LED 3 SC wall model

130.000 Lux (at 1 m distance)

SC models are equipped with Single-Colour-chips.

Facetted multi-lens system

A multitude of computer-calculated facetted lenses guarantees homogeneity and lowest shadiness in the light field.

Separately arranged optical systems, each with one LED module (Single-Colour models), generate their own light field, which increases the contrast effect of the OR light.

Light intensities of 100.000 Lux can be attained without difficulty.

Superiour colour rendition

With colour rendering indexes Ra above 96 and R9 (red) above 90 the surgeon recognizes clearly the tiniest nuances of colour in tissue.

The colour rendering index for SC models is Ra = 95.

For recognizing the exact colour spectrum of the wound the exact rendition of the red colour range is essential.

R9(red) ≥ 90 means for the surgeon a visibly better recognition of details.

The colour spectrum of the wound is rendered naturally with rich contrast.

The OT-light clearly provides welcome relief for your eyes.

Illumination in depth

You have the possibility to increase the light intensity of the central segment of the OT-light.

This enables an optimum illumination of the wound field according to its texture and the shadowing effects.

A high and adequate light intensity is very important especially in cases of narrow and deep wound channels.

Integrated OT-laser pointer (optional)

The built-in laser pointer always indicates the middle of the light field and helps the surgeon to find the optimal position of the OT-light to the wound field.

The laser pointer can be activated either at the key pad on the lamp housing or by a turn of the ring at the sterilisable handle.

After a short time the laser pointer turns off automatically.

Key pad on the lamp housing

Several light functions can be adjusted electronically, such as:

• Switching ON and OFF

• Illumination in depth

• Laser pointer

• Electronic light intensity control

• Endo-Light

• Changing the colour temperature: 3750, 4000, 4250, 4500, 4750 K

Flow properties

During development high attention was paid to the performance of the new LED OR lights in laminar-flow ceiling systems.

The flow-enhancing ring form of all light heads and the minimal surface avoid any heat increase in the surgeon’s head area and create a perfect laminar flow performance, being a basic hygienic requirement in surgery.

Hygiene

The disk sealings of the light outlets and the circumferential sealing cord avoid infiltrations of dust, dirt and liquids inside the lamp head.

Wall panel

The OT-light can be operated at the wall panel (optional equipment against surcharge).

The light functions can be adjusted on the wall panel as well as on the key pad of the light.

Several light functions can be adjusted electronically, such as:

• Switching ON and OFF

• Illumination in depth

• Laser pointe

• Electronic light intensity control

• Endo-Light

Handle

Merging of light fields is done by turning the sterilisable handle.

The ring at the top of the handle allows the surgeon to set the most important light functions in the sterile area.

The light functions mentioned below can be set at the ring of sterilisable handle:

• Depth light

• Laser pointer

• Light intensity control

Cool light

The LED technology is much more effective than conventional light sources such as halogen bulbs.

The heat radiation is reduced to a minimum without using any expensive filter technique.

The temperature increase in the surgeon’s head area is almost nonexistent.

Long life-span / low power consumption

The life-span of more than 40.000 operating hours reduces the costs for exchanging and replacing the illuminants considerably, compared with the conventional halogen technology used with former OT-lights.

By implementation of the LED technology the power consumption could be reduced partially with more than 50%.

Technical file pdf  for more specification data of this product.

Contact us for optional price request and Shipping Costs.